V-Amp Downloads

V-AMP Editor 3.0 public beta - Design (english) (1608 KB)

• Public Beta Software for use with V-AMP3, V-AMP and BASS V-AMPs.
• Does not work with V-AMP2, V-AMPIRE or V-AMP PRO Products
• Windows Only
• V-AMP2 and V-AMP3 sysex data and presets files are incompatible
• Owners of V-AMP3 and V-AMP2 must use both editors respectively

WARNING

This software is provided AS IS and without Warranty. V-AMP Editor 3.0 is provided as a courtesy to our customers. There are no anticipated updates to this software. BEHRINGER will not provide Technical Support for users of V-AMP Editor 3.0.

V-AMP 2 Firmware Upgrade 2.2.4

Please note that this update is intended for use with the V-AMP 2 only and will not function with any other models.

To update your V-AMP 2 you will need to replace the original EPROM in the V-AMP 2 with a new EPROM which has been pre-programmed with the downloaded datafile.

If you do not have the means to write this datafile to a blank EPROM, then you can order a pre-programmed EPROM from your nearest BEHRINGER authorised service centre.

If you have further questions or require more detailed information we ask you to contact BEHRINGER customer support.

WARNING

You must remove the cover of your BEHRINGER unit to add/exchange the EPROM. Electrical current from power cables can be hazardous. DO NOT REMOVE THE COVER OF YOUR BEHRINGER UNIT UNLESS YOU ARE QUALIFIED TO DO SO. To avoid personal injury or equipment damage, disconnect the attached power cords before you open the unit cover. Do not operate the BEHRINGER unit without the cover in place. Failure to take these precautions may result in personal injury and system damage.

CAUTION

Do not make mechanical or electrical modifications to the equipment. BEHRINGER is not responsible for regulatory compliance of a modified BEHRINGER product. If you are not confident of your own ability to perform this action, then please contact one of our authorised service centres or the dealership from where the unit was purchased. 

LX1 PRO Firmware Upgrade 2.2.4

Please note that this update is intended for use with the V-AMP PRO only and will not function with any other models.

To update your V-AMP PRO you will need to replace the original EPROM in the V-AMP PRO with a new EPROM which has been pre-programmed with the downloaded datafile.

If you do not have the means to write this datafile to a blank EPROM, then you can order a pre-programmed EPROM from your nearest BEHRINGER authorised service centre.

If you have further questions or require more detailed information we ask you to contact BEHRINGER customer support.

WARNING

You must remove the cover of your BEHRINGER unit to add/exchange the EPROM. Electrical current from power cables can be hazardous. DO NOT REMOVE THE COVER OF YOUR BEHRINGER UNIT UNLESS YOU ARE QUALIFIED TO DO SO. To avoid personal injury or equipment damage, disconnect the attached power cords before you open the unit cover. Do not operate the BEHRINGER unit without the cover in place. Failure to take these precautions may result in personal injury and system damage.

CAUTION

Do not make mechanical or electrical modifications to the equipment. BEHRINGER is not responsible for regulatory compliance of a modified BEHRINGER product. If you are not confident of your own ability to perform this action, then please contact one of our authorised service centres or the dealership from where the unit was purchased.

LX1B Firmware Upgrade 1.09

Please note that this update is intended for use with the BASS V-AMP only and will not function with any other models.

To update your BASS V-AMP you will need to replace the original EPROM in the BASS V-AMP with a new EPROM which has been pre-programmed with the downloaded datafile.

If you do not have the means to write this datafile to a blank EPROM, then you can order a pre-programmed EPROM from your nearest BEHRINGER authorised service centre.

If you have further questions or require more detailed information we ask you to contact BEHRINGER customer support.

WARNING

You must remove the cover of your BEHRINGER unit to add/exchange the EPROM. Electrical current from power cables can be hazardous. DO NOT REMOVE THE COVER OF YOUR BEHRINGER UNIT UNLESS YOU ARE QUALIFIED TO DO SO. To avoid personal injury or equipment damage, disconnect the attached power cords before you open the unit cover. Do not operate the BEHRINGER unit without the cover in place. Failure to take these precautions may result in personal injury and system damage.

CAUTION

Do not make mechanical or electrical modifications to the equipment. BEHRINGER is not responsible for regulatory compliance of a modified BEHRINGER product. If you are not confident of your own ability to perform this action, then please contact one of our authorised service centres or the dealership from where the unit was purchased.

LX1B PRO Firmware Upgrade 1.09

Please note that this update is intended for use with the BASS V-AMP PRO only and will not function with any other models.

To update your BASS V-AMP PRO you will need to replace the original EPROM in the BASS V-AMP PRO with a new EPROM which has been pre-programmed with the downloaded datafile.

If you do not have the means to write this datafile to a blank EPROM, then you can order a pre-programmed EPROM from your nearest BEHRINGER authorised service centre.

If you have further questions or require more detailed information we ask you to contact BEHRINGER customer support.

WARNING

You must remove the cover of your BEHRINGER unit to add/exchange the EPROM. Electrical current from power cables can be hazardous. DO NOT REMOVE THE COVER OF YOUR BEHRINGER UNIT UNLESS YOU ARE QUALIFIED TO DO SO. To avoid personal injury or equipment damage, disconnect the attached power cords before you open the unit cover. Do not operate the BEHRINGER unit without the cover in place. Failure to take these precautions may result in personal injury and system damage.

CAUTION

Do not make mechanical or electrical modifications to the equipment. BEHRINGER is not responsible for regulatory compliance of a modified BEHRINGER product. If you are not confident of your own ability to perform this action, then please contact one of our authorised service centres or the dealership from where the unit was purchased.